Siemens SCALANCE W1750D CLI - Ams-Backup-Ip

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
43
Syntax
a-max-clients <ssid_profile> <max-clients>
Parameter
Description
Range
<ssid_profile>
Denotes the SSID profile for which the maximum clients
limit is to be configured.
—
<max-clients>
Denotes the maximum number of clients that can be con-
figured on the 5 GHz radio channel of the AP.
1 to 255.
Usage Guidelines
Use this command to set the maximum number of clients allowed to connect to 5 GHz radio
channels for a specific SSID profile. This is a per-AP and per-Radio configuration.
Example
The following example configures the maximum number of clients for a 5 GHz radio channel:
(scalance)# a-max-clients test1 35
Command Information
AP Platform
Command Mode
All Platforms
Privileged EXEC mode
4.1.18 ams-backup-ip
Description
This command adds the IP address or domain name of the backup AirWave Management
server.
Syntax
ams-bacams-ip kup-ip <IP-address or domain name>
no…
Parameter
Description
<IP-address or domain
name>
Configures the IP address or domain name of the secondary Air-
Wave Management Server.
no…
Removes the specified configuration parameter.