Siemens SCALANCE W1750D CLI - Hotspot Anqp-Nwk-Auth-Profile

CLI Commands
4.8 H
SCALANCE W1750D CLI
130 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(nai-realm "home")# nai-realm-auth-value-1 mschapv2
(scalance)(nai-realm "home")# nai-home-realm
(scalance)(nai-realm "home")# enable
(scalance)(nai-realm "home")# end
(scalance)# commit apply.
Command Information
AP Platform
Command Mode
All platforms Configuration mode and the NAI realm profile
configuration sub-mode
4.8.9 hotspot anqp-nwk-auth-profile
Description
This command configures an ANQP network authentication profile to define authentication
type being used by the hotspot network.
Syntax
hotspot anqp-nwk-auth-profile <profile-name>
enable
nwk-auth-type <auth-type>
url <url>
no…
Parameter
Description
Range
hotspot anqp-nwk-
auth-profile
<profile-name>
Configures an ANQP network authentication profile. —
enable
Enables the network authentication profile.
—
nwk-auth-type
Defines the network Authentication type being used
by the hotspot network.
—