Siemens SCALANCE W1750D CLI - Page 131

CLI Commands
4.8 H
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
131
Parameter
Description
Range
<auth-type>
Allows you to specify any of the following values:
•
accept-term-and-cond
—When configured, the
network requires the user to accept terms and
conditions.
NOTE:
This option requires you to specify a redirec-
tion URL string as an IP address, FQDN or URL.
•
online-enrollment
—When configured, the net-
work supports the online enrollment.
•
http-redirect
—When configured, additional in-
formation on the network is provided through
HTTP or HTTPS redirection.
•
dns-redirect
—When configured, additional in-
formation on the network is provided through
DNS redirection.
NOTE:
This option requires you to specify a redirec-
tion URL string as an IP address, FQDN or URL.
accept-term
and-cond,
online- enrollment,
http-redirect, dns-
redirect
url
Configures URL, IP address, or FQDN used by the
hotspot network for the
accept-term-and- cond
or
dns-redirect network authentication types.
—
no…
Removes any existing configuration.
—
Usage Guidelines
When the asra option is enabled in the hotspot profile associated with a WLAN SSID, the
settings configured for the network authentication profile are sent in the GAS response to the
client.
Example
The following command configures a network authentication profile for DNS redirection.
(scalance)(config)# hotspot anqp-nwk-auth-profile default
(scalance)(network-auth "default")# nwk-auth-type dns-redirection
(scalance)(network-auth "default")# url http://www.example.com
(scalance)(network-auth "default")# enable
(scalance)(network-auth "default")# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and the ANQP network
authentication profile configuration sub-mode