Siemens SCALANCE W1750D CLI - Allowed-Ap

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
41
(scalance)(ALG)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and ALG configuration sub-
mode.
4.1.15 allowed-ap
Description
This command allows an AP to join the AP cluster.
Syntax
allowed-ap <MAC-address>
no…
Parameter
Description
allowed-ap <MAC-
address>
Specifies the MAC address of the AP that is allowed to join the cluster.
no…
Removes the specified configuration parameter.
Usage Guidelines
Use this command to allow an AP to join the cluster.
Example
The following command configures an allowed AP:
(scalance)(config)# allowed-ap 01:23:45:67:89:AB
Command Information
AP Platform
Command Mode
All platforms
Configuration mode