Siemens SCALANCE W1750D CLI - Device-ID

CLI Commands
4.4 D
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
87
Usage Guidelines
Use this command to prevent the local routing of traffic if you have security and traffic
management policies defined for upstream devices.
Example
The following command disables local routing:
(scalance)(config)# deny-local-routing
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.4.4 device-id
Description
This command assigns an ID for the AP device.
Syntax
device-id <device>
Parameter
Description
device-id <device>
Configures an ID for the AP device.
Usage Guidelines
Use this command to configure a device identification.
Example
The following example configures a device ID:
(scalance)(config)# device-ID Device1
(scalance)(config)# end
(scalance)# commit apply