Siemens SCALANCE W1750D CLI - Vpn Preemption; Vpn Primary

CLI Commands
4.19 V
SCALANCE W1750D CLI
660 Function Manual, 03/2019, C79000-G8976-C452-04
4.19.14 vpn preemption
Description
This command enables pre-emption to allow the VPN tunnel to switch back to the primary
host after a failover.
Syntax
vpn preemption
no…
Parameter
Description
vpn preemption
Enables pre-emption to allow the VPN tunnel to switch to the primary VPN
server when it becomes available after a failover.
no…
Removes the VPN pre-emption configuration.
Usage Guidelines
Use this command to enable pre-emption when both primary and secondary servers are
configured and fast failover feature is enabled.
Example
The following example enables VPN pre-emption.
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.19.15 vpn primary
Description
This command configures a primary VPN server for VPN connections.
Syntax
vpn primary <name>