Siemens SCALANCE W1750D CLI - Hotspot H2 Qp-Conn-Cap-Profile

CLI Commands
4.8 H
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
137
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and the ANQP venue name
profile configuration sub-mode
4.8.12 hotspot h2qp-conn-cap-profile
Description
This command configures a H2QP profile that advertises hotspot protocol and port
capabilities.
.
Syntax
hotspot h2qp-conn-cap-profile <profile-name>
enable
esp-port
icmp
tcp-ftp
tcp-http
tcp-pptp-vpn
tcp-ssh
tcp-tls-vpn
tcp-voip
udp-ike2
udp-ipsec-vpn
udp-voip
no…
Parameter
Description
hotspot h2qp-conn-cap-
profile<profile-name>
Creates a connection capability profile.
enable
Enables the connection capability H2QP profile.
esp-port
Enables the ESP port used by IPsec VPNs. (port 0)
icmp
Indicates that the ICMP port is enabled and available. (port 0)
tcp-ftp
Enables the FTP port. (port 20)