Siemens SCALANCE W1750D CLI - Dynamic-Dns

CLI Commands
4.4 D
SCALANCE W1750D CLI
96 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
dynamic-cpu-mgmt {auto| disable| enable}
Parameter
Description
auto
Configures the AP to automatically enable or disableCPU management
feature during run-time. When configured, the AP determines the need for
enabling or disabling CPU management, based on the real-time load calcu-
lations taking into account all different functions that the CPU needs to
perform.The auto option is the default and recommended setting.
disable
Disables CPU management on all APs, typically for small networks. This
setting protects the user experience.
enable
Enables the CPU management feature. When configured, the client and
network management functions are protected. This setting helps in large
networks with a high client density.
Usage Guidelines
Use this command to enable or disable resource management across different functions
performed by an AP.
Example
The following example enables the automatic enabling or disabling of CPU management:
(scalance)(config)# dynamic-cpu-mgmt auto
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.4.15 dynamic-dns
Description
This command makes a one time dynamic update of the DNS records of the AP and its
clients after the user has manually configured the dns values.