Siemens SCALANCE W1750D CLI - Show Ap Mesh Counters

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
371
IP Address: 10.15.20.252
Network Mask:10.15.22.257
Gateway IP:10.15.20.255
DNS Server: 92.168.1.10
Domain Name: floor1.test.com
Name:Undefined
The output of this command includes the following information:
Parameter
Description
IP Address
Displays the IP address of the AP.
Network Mask
Displays the Network mask of the network.
Gateway IP
Displays the Gateway IP address to which traffic is sent.
DNS Server
Displays the IP address of the DNS server.
Domain Name
Displays the Domain name of the server
Name
Displays the name of the AP.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.78 show ap mesh counters
Description
This command displays the mesh counters for an AP.
Syntax
show ap mesh counter
Usage Guidelines
Use this command to view a list of mesh counters available for an AP.
Example
The following example shows the output of show ap mesh counter command.
Mesh Packet Counters
--------------------