Siemens SCALANCE W1750D CLI - Page 372

CLI Commands
4.16 S
SCALANCE W1750D CLI
372 Function Manual, 03/2019, C79000-G8976-C452-04
Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail
Link up/down Resel. Switch Other Mgmt
--------- --------- --------- --------- ---------- --------- ---------- ---------- --
--------- - ------ ------ ----------
Parent 0 0 770 770(770 HT) 0 0 0 0 - - 0
Received Packet Statistics: Total 7013859, Mgmt 7013859 (dropped non-mesh 0), Da ta 0
(dropped unassociated 0)HT: pns=770 ans=0 pnr=0 ars=0 arr=0 anr=0
Recovery Profile Usage Counters
-------------------------------
Item Value
---- -----
Enter recovery mode 0 Exit recovery mode 0
Total connections to switch 0
Mesh loop-prevention Sequence No.:370765 Mesh timer ticks:370764 d8:c7:c8:c4:42:98#
show ap mesh counters Mesh Packet Counters
--------------------
Interface Echo Sent Echo Recv Probe Req Probe Resp Assoc Req Assoc Resp Assoc Fail
Link up/down Resel. Switch Other Mgmt
--------- --------- --------- --------- ---------- --------- ---------- ---------- --
--------- - ------ ------ ----------
Parent 0 0 770 770(770 HT) 0 0 0 0 - - 0
Received Packet Statistics: Total 7016747, Mgmt 7016747 (dropped non-mesh 0), Data 0
(dropped unassociated 0)HT: pns=770 ans=0 pnr=0 ars=0 arr=0 anr=0
Recovery Profile Usage Counters
-------------------------------
Item Value
---- -----
Enter recovery mode 0 Exit recovery mode 0
Total connections to switch 0
Mesh loop-prevention Sequence No.:370891 Mesh timer ticks:370890
The output of the above commands includes the following information:
Parameter
Description
Interface
Indicates whether the mesh interface connects to a Parent AP or a Child
AP. Each row of data in the Mesh Packet Counters table shows counter
values for an individual interface.
Echo Sent
Number of echo packets sent.
Echo Recv
Number of echo packets received.
Probe Req
Number of probe request packets sent from the interface specified in the
Mesh-IF parameter.