Siemens SCALANCE W1750D CLI - Attack

CLI Commands
4.1 A
SCALANCE W1750D CLI
56 Function Manual, 03/2019, C79000-G8976-C452-04
(scalance)(ARM)# client-match
(scalance)(ARM)# error-rate-threshold 80
(scalance)(ARM)# error-rate-wait-time 120
(scalance)(ARM)# free-channel-index 75
(scalance)(ARM)# ideal-coverage-index 7
(scalance)(ARM)# channel-quality-threshold 50
(scalance)(ARM)# channel-quality-wait-time 180
(scalance)(ARM)# wide-bands 5
(scalance)(ARM)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration and ARM configuration sub-mode.
4.1.28 attack
Description
This command enables firewall settings to protect the network against wired attacks, such as
ARP attacks or malformed DHCP packets, and notify the administrator when these attacks
are detected.
Syntax
attack
drop-bad-arp-enable
fix-dhcp-enable
no…
poison-check-enable
Parameter
Description
drop-bad-arp-enable
Enables the AP to block the bad ARP request.
fix-dhcp-enable
Enables the AP to fix the malformed DHCP packets.
poison-check-enable
Enables the AP to trigger an alert to the user about the ARP poisoning
that may have been caused by the rogue APs. Enabling this parameter
triggers alerts when a known client on the AP spoofs the base MAC ad-
dress of the AP.
no…
Removes the specified configuration parameter.