Siemens SCALANCE W1750D CLI - Page 55

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
55
Command/Parameter
Description
Range
Default
min-tx-power <pow-
er>
Sets the minimum transmission power. This
indicates the minimum EIRP. If the minimum
transmission EIRP setting configured on an
AP is not supported by the AP model, this
value is reduced to the highest supported
power setting.
0 - 127dBm 9
scanning
Allows the APs to scan other channels for RF
Management and WIPS enforcement.
— Enabled
spectrum-load-
balancing
{<calc-interval>|
<calc- threshold>|
<nb-matching>}
— —
wide-bands {<none>|
<all>| <2.4>| <5>}
Allows administrators to configure 40 MHz
channels in the 2.4 GHz and 5 GHz bands. 40
MHz channels are two 20 MHz adjacent
channels that are bonded together. The 40
MHz channels double the frequency band-
width available for data transmission. For high
performanc e, enter 5 GHz. If the AP density
is low, enter 2.4 GHz.
none, all, 2.4,
and 5
5
no…
Removes the current value for that parameter
and return it to its default setting
— —
Usage Guidelines
Use this command to configure ARM features on an AP. ARM ensures low-latency roaming,
consistently high performance, and maximum client compatibility in a multi-channel
environment. By ensuring the fair distribution of available Wi-Fi bandwidth to mobile devices,
ARM ensures that data, voice, and video applications have sufficient network resources at all
times. ARM allows mixed 802.11ac, a, b, g, and n client types to inter-operate at the highest
performance levels.
Example
The following example configures an ARM profile:
(scalance)(config)# arm
(scalance)(ARM)# 80mhz-support
(scalance)(ARM)# a-channels 44
(scalance)(ARM)# min-tx-power 18
(scalance)(ARM)# max-tx-power 127
(scalance)(ARM)# band-steering-mode prefer-5ghz
(scalance)(ARM)# air-time-fairness-mode fair-access
(scalance)(ARM)# backoff-time 600
(scalance)(ARM)# scanning
(scalance)(ARM)# client-aware