Siemens SCALANCE W1750D CLI - Show Ids

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
505
4.16.138 show ids
Description
This command displays the list of unknown APs and clients detected by the AP with the IDS
feature enabled.
Syntax
show ids {ap <mac>| aps| client <mac>|clients| phy-types| rap-types| rogue-ap <mac>}
Parameter
Description
ap <mac>
Displays the signal details for the AP.
aps
Displays the unknown Access Points detected by the AP.
client <mac>
Displays a details of the AP to which the client is connected.
clients
Displays a list of unknown clients detected by the AP.
phy-types
Displays the PHY details of the AP.
rap-types
Displays a list of Remote APs (RAPs) detected by the AP.
rogue-ap <mac>
Displays the list of rogue APs detected by the master AP in the AP clus-
ter.
Usage Guidelines
Use this command to view the intrusion detection details.
Example
The following output is displayed for the show ids aps command:
Unknown Access Points Detected
------------------------------
MAC Address Network Classification Chan. Type Last Seen
----------- ------- -------------- ----- ---- ---------
6c:f3:7f:56:6d:01 NTT-SPOT Interfering 1 G 17:32:19
6c:f3:7f:56:67:41 NTT-SPOT Interfering 1 G 17:37:49
00:24:6c:2a:78:d2 edward-suiteb-178 Interfering 11 GN 20MZ 17:37:19
6c:f3:7f:94:63:30 avyas_vap1 Interfering 6 G 17:40:20
6c:f3:7f:94:63:02 avyas_vap2 Interfering 6 G 17:40:20 00:24:
6c:2a:7d:0b edward-suiteb Interfering 149 AN 40MZ 17:39:19
6c:f3:7f:a5:df:34 sw-san-rapng-nat Interfering 153 AN 20MZ 17:38:49
6c:f3:7f:56:7d:00 7SPOT Interfering 1 GN 20MZ 17:32:19
00:24:6c:80:8e:82 instant Interfering 11 GN 20MZ 17:29:48