Siemens SCALANCE W1750D CLI - Show Ddns

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
471
● Datapath user statistics such as current entries, pending deletes, high water mark,
maximum entries, total entries, allocation failures, invalid users, and maximum link length
for the AP
● VLAN table information such as VLAN memberships inside the datapath including L2
tunnels for the AP.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.116 show ddns
Description
This command displays the DDNS status of the AP and the list of DDNS clients.
Syntax
show ddns [clients]
Usage Guidelines
Use this command to view information about the DDNS clients.
Example
The following output is displayed for the show ddns command:
DDNS Enabled :Enabled
DDNS Server :10.17.132.85
DDNS Key :hmac-sha1: ddns-key:asdafsdfasdfsgdsgs=
DDNS Interval 900
The following output is displayed for the
show ddns clients command:
DDNS Client List
Host Name
Domain Name
IP Address
DHCP profile name
Success Count
Failure Count
---------
-----------
----------
-----------------
-------------
-------------
iap1-ddns-home
test.ddns
192.192.192.17
None
16
22
132-13-Auto-PC
test.ddns
192.168.99.18
DistL3
9
3
132-14-Auto-PC
test.ddns
192.168.99.4
DistL3
2
0
Last updated Last update status
------------ ------------------