Siemens SCALANCE W1750D CLI - Wlan Captive-Portal

CLI Commands
4.20 W
SCALANCE W1750D CLI
664 Function Manual, 03/2019, C79000-G8976-C452-04
no…
Parameter
Description
Range
Default
ciphers Configures the strength of the cipher suite:
•
high
: encryption keys larger than 128 bits
•
low
: 56 or 64 bit encryption keys
•
medium
: 128 bit encryption keys
high,
medium,
low
high
ssl-protocol
Enables SSL protocol for secure communication with the
web server.
— all
all
Enables all versions of TLS protocol for secure commu-
nication with the web server.
— —
tlsv1
Enables TLS v1 protocol.
—
—
tlsv1.1
Enables TLS v1.1 protocol.
—
—
tlsv1.2
Enables TLS v1.2 protocol.
—
—
no…
Removes the configuration.
—
—
Usage Guidelines
Use the web-server command to enable secure communication with the web server through
the TLS protocol.
Example
The following example shows how to enable TLS v1.0:
(scalance)(config)# web-server
(scalance)(web-server)# ssl-protocol tlsv1
(scalance)(web-server)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.20.3 wlan captive-portal
Description
This command customizes the appearance of the internal captive portal splash page of the
guest users.