Siemens SCALANCE W1750D CLI - Show Ap Dot11 K-Nbrs

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
369
Syntax
show ap dot11k-beacon-report <mac>
Parameter
Description
<mac>
Allows you to specify the MAC address of the client for which you want to
view the beacon report details.
Usage Guidelines
Use this command to view the beacon report details for 802.11k clients connected to an AP.
Example
The following example shows the output of the show ap dot11k-beacon-report <mac>
command:
(scalance)# show ap dot11k-beacon-report 70:11:24:56:02:72
Client: 70:11:24:56:02:72
Status: Success Nbr count: 4
Last received: 31s
Client 11k Beacon Report
------------------------
BSSID
Channel
RSSI
Antenna
-----
------
------
------
6c:f3:7f:b6:62:f0
38
92
0
6c:f3:7f:b6:69:30
38
94
0
6c:f3:7f:4a:43:d0
46
94
0
6c:f3:7f:b6:66:30
46
92
0
The output of this command displays information on the number of 802.11k neighbors,
connection status, and the channel, RSSI and antenna details for the specified MAC
address.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.76 show ap dot11k-nbrs
Description
This command displays the neighboring details of the 802.11k clients connected to an AP.
Syntax
show ap dot11k-nbrs