Siemens SCALANCE W1750D CLI - Dynamic-Radius-Proxy; Dynamic-Tacacs-Proxy

CLI Commands
4.4 D
SCALANCE W1750D CLI
100 Function Manual, 03/2019, C79000-G8976-C452-04
4.4.18 dynamic-radius-proxy
Description
This command enables the use of IP Address of the Virtual Controller for communication
with external RADIUS servers.
Syntax
dynamic-radius-proxy
no…
Parameter
Description
dynamic-radius-proxy
Enables dynamic RADIUS proxy feature to allow the Virtual Con-
troller network to use the IP address of the Virtual Controller when
communicating with the external RADIUS servers.
no…
Removes the configuration.
Usage Guidelines
Ensure that you set the Virtual Controller IP address as a NAS client in the RADIUS server
when Dynamic RADIUS proxy is enabled.
Example
The following example enables the dynamic RADIUS proxy feature:
(scalance)(config)# dynamic-radius-proxy
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.4.19 dynamic-tacacs-proxy
Description
This command enables the Virtual Controller network to use the IP Address of the Virtual
Controller for communication with external TACACS servers.