Siemens SCALANCE W1750D CLI - Show All Monitor

CLI Commands
4.16 S
SCALANCE W1750D CLI
264 Function Manual, 03/2019, C79000-G8976-C452-04
The output of this command displays if the ALG protocols such as Skinny Call Control
Protocol (SCCP), Session Initiation Protocol (SIP), and VOCERA are enabled.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.14 show all monitor
Description
This command shows information for AMs.
Syntax
show all monitor active-laser-beams
Parameter
Description
active-laser-beams
Show active laser beam generators.
The output of this command shows a list of all APs that are actively per-
forming policy enforcement containment such as rogue containment. This
command can tell us which AP is sending out deauthorization frames,
although it does not specify which AP is being contained
Usage Guidelines
Use this command to view the information on AMs.
Example
The following example shows the output of show all monitor command.
Swarm Active Laser Beam Sources
-------------------------------
bssid channel rssi ap name lms ip master ip inactive time reported by
----- ------- ---- ------- ------ --------- ------------- -----------
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode