Siemens SCALANCE W1750D CLI - G-Max-Clients

CLI Commands
4.7 G
SCALANCE W1750D CLI
114 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
g-ant-pol <pol>
Parameter
Description
Range
<pol>
Denotes the antenna polarization value for 2.4 GHz radio chan-
nel.
• 0: Co-Polarized radio ID
• 1: Cross-Polarized radio ID
0 or 1
Usage Guidelines
Use this command to set the antenna polarization value for 2.4 GHz radio channel.
Example
The following example configures the antenna polarization value for a 2.4 GHz radio
channel:
(scalance)# g-ant-pol 0
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.7.3 g-max-clients
Description
This command configures the maximum number of clients allowed for an SSID profile on a
2.4 GHz radio channel.
Syntax
g-max-clients <ssid_profile> <max-clients>
Parameter
Description
Range
<ssid_profile>
Denotes the SSID profile for which the maximum clients
limit is to be configured.
—
<max-clients>
Denotes the maximum number of clients that can be con-
figured on the 2.4 GHz radio channel of the AP.
1 to 255.