Siemens SCALANCE W1750D CLI - Show Cluster-Security

CLI Commands
4.16 S
SCALANCE W1750D CLI
430 Function Manual, 03/2019, C79000-G8976-C452-04
Related Commands
Command
Description
Mode
clock timezone
Configures timezones for the AP.
Config mode
clock summer-time
Configures the summer-time for the
daylight savings time settings.
Config mode
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.108 show cluster-security
Description
This command displays cluster security configuration details for all the APs in the cluster.
Syntax
show cluster-security [connections][peers][stats]
Parameter
Description
cluster-security
Displays the status of the DTLS configuration and DTLS state,
whether enabled or disabled.
connections
Displays the total number of connections monitored in the swarm
by cluster security dtls.
peers
Displays the details and status of the peers monitored by cluster
security dtls.
stats
Displays the cluster security dtls monitoring stats for the cluster.
Usage Guidelines
Use this command to view information about the cluster security configuration and
monitoring statistics for the APs in the cluster.
Example
The following output is displayed for the show cluster-security command:
Cluster Security Profile
------------------------
Parameter
Value
---------
-----