Siemens SCALANCE W1750D CLI - Page 431

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
431
DTLS config
Disabled
DTLS state
Disabled Low assurance devices Dis-
allow Reboot required No
The following output is displayed for the show cluster-security
connetions command:
---------------------------------
IDX :Connection Index
Flags :I-Initiator, R-Responsder
Inactivity :Time remaining till inactivity
timeout Re-Neg
:Time remaining till Re-negotiation
---------------------------------
Cluster Security DTLS Connections
---------------------------------
Local IDX Remote IDX State Flags Local Address
Peer
Address
Rx bytes
Tx
bytes Age Inactivity Re-Neg
--------- ---------- ----- ----- -------------
---------
---
--------
---
----- --- ---------- ------
19bb00b0 7df90024 connected R 10.17.142.77[4434]
138016 05h:04m:32s 01m:55s 01h:54m:37s
10.17.142
.74[4434]
673511
19bb00b1 4db20024 connected R 10.17.142.77[4434]
80788 02h:58m:17s 01m:53s 04h:21m:06s
10.17.142
.73[4434]
394516
19bb00b2 1f6e0024 connected R 10.17.142.77[4434]
74632 02h:44m:18s 01m:57s 03h:55m:52s
10.17.142
.76[4434]
354332
19bb00b3 7d6f0024 connected I 10.17.142.77[4434]
57304 02h:09m:39s 01m:57s 04h:33m:12s
10.17.142
.71[4434]
269882
19bb00b4 57fd0024 connected R 10.17.142.77[4434]
18544 40m:59s 01m:52s 05h:56m:43s
10.17.142
.75[4434]
90933
Total connections count:5
The following output is displayed for the show cluster-security
peers command:
---------------------------
IDX
:Connection Index
---------------------------
Cluster Security DTLS Peers
---------------------------
Peer Address
State
Local IDX
------------
-----
---------
10.17.142
.76[4434]
active
19bb00b2
10.17.142.73[4434]
active
19bb00b1
10.17.142.75[4434]
active
19bb00b4
10.17.142.74[4434]
active
19bb00b0
10.17.142.71[4434]
active
19bb00b3
Total peers count:5
The following output is displayed for the show cluster-security
stats command:
Cluster Security Statistics
---------------------------
Statistic Name
Counts