Siemens SCALANCE W1750D CLI - Show Time-Range

CLI Commands
4.16 S
SCALANCE W1750D CLI
594 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.214 show time-range
Description
This command displays a list of the time range profiles configured on the AP.
Syntax
show time-range
Usage Guidelines
Use this command to view the time range profiles configured on an AP.
Example
The following example shows the output of the show time-range command:
Time Range Summary
------------------
Profile Name
Type
Start Day Start Time End Day End Time Valid
------------
----
--------- ---------- ------- -------- -----
Lunch Break
absolute 10/28/2014 12:40 10/28/2014 13:00 No
The output of this command provides the following information:
Parameter
Description
Profile Name
Indicates the name of Time Profiles created on the AP.
Type
Indicates the type of time profile created.
Start Day
Indicates the date on which the time profile is enabled on the SSID.
Start Time
Indicates the time at which the time profile is made active on the SSID.
End Day
Indicates the date on which the time profile is disabled on the SSID.
End Time
Indicates the time at which the time profile is disabled on the SSID.
Valid
Indicates if the profile is valid for current time. For example, if a profile is run
only during a specific time of the day and is not active when the command is
run, the
Valid
column displays the status as
No
.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode