Siemens SCALANCE W1750D CLI - Traceroute; Time-Range

CLI Commands
4.17 T
SCALANCE W1750D CLI
636 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.17.5 traceroute
Description
This command traces the route to the specified IP address.
Syntax
traceroute <ipaddr>
Parameter
Description
<ipaddr>
Displays the destination IP address.
Usage Guidelines
Use this command to identify points of failure in your network.
Example
The following example shows the output of traceroute command:
<scalance> #traceroute 10.1.2.3
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.17.6 time-range
Description
This command allows you to create time range profiles on an AP to enable or disable access
to an SSID during a specific period of time.