Siemens SCALANCE W1750D CLI - Typographic Conventions

SCALANCE W CLI
3.4 Typographic Conventions
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
25
3.4 Typographic Conventions
The following conventions are used throughout this document to emphasize important
concepts:
Table 3- 4 Typographical Conventions
Type Style
Description
Italics This style is used for emphasizing important terms and to
mark the titles of books.
Boldface
This style is used for command names and parameter
options when mentioned in the text.
Commands
This fixed-width font depicts command syntax and ex-
amples of commands and command output.
<angle brackets>
In the command syntax, text within angle brackets repre-
sents items that you should replace with information
appropriate to your specific situation.
For example, ping <ipaddr>
In this example, you would type “ping” at the system
prompt exactly as shown, followed by the IP address of
the system to which ICMP echo packets are to be sent.
Do not type the angle brackets.
[square brackets]
In the command syntax, items enclosed in brackets are
optional. Do not type the brackets.
{Item_A|Item_B}
In the command examples, single items within curled
braces and separated by a vertical bar represent the
available choices. Enter only one choice. Do not type the
braces or bars.
{ap-name <ap-name>}|{ipaddr <ip-
addr>}
Two items within curled braces indicate that both param-
eters must be entered together. If two or more sets of
curled braces are separated by a vertical bar, like in the
example to the left, enter only one choice. Do not type
the braces or bars.
The following informational icons are used throughout this guide:
Note
Indicates helpful suggestions, pertinent information, and important things to remember.
NOTICE
Indicates a risk of damage to your hardware or loss of data.
WARNING
Indicates a risk of personal injury or death.