Siemens SCALANCE W1750D CLI - Content-Filtering

CLI Commands
4.3 C
SCALANCE W1750D CLI
80 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
console
enable
disable
no console
Parameter
Description
console
Allows you to enter the console configuration mode.
enable
Enables console access to the AP.
disable
Disables console access to the AP.
no…
Removes the console access settings.
Usage Guidelines
Use this command to enable or disable access to the AP console and thus allow users to
configure AP settings or debug system errors. By default, the console access to the AP is
enabled.
Example
The following example disables console access to the AP:
(scalance)(config)# console
(scalance)(console)# disable
(scalance)(console)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Console configuration sub mode
4.3.16 content-filtering
Description
This command enables content filtering feature. When content filtering is enabled on an
SSID, all DNS requests to non-corporate domains on this wireless network are sent to
OpenDNS.