Siemens SCALANCE W1750D CLI - Show Allowed-Aps

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
265
4.16.15 show allowed-aps
Description
This command displays the list of APs that are allowed to join the AP cluster.
Syntax
show allowed-aps
Usage Guidelines
Use this command to view the AP whitelist.
Example
The following example shows the output of the show allowed-aps command:
Allow New APs :enable AP Whitelist
------------
MAC Address
-----------
d8:c7:c8:cb:d4:20
d8:c7:c8:cb:d3:98
d8:c7:c8:cb:d3:b4
d8:c7:c8:cb:d3:d4
The output of this command provides the following information:
Parameter
Description
Allow New APs
Indicates if the new APs are allowed to join the network.
MAC Address
Displays the MAC address of the APs that are allowed to join the network.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode