Siemens SCALANCE W1750D CLI - Syslog-Server

CLI Commands
4.16 S
SCALANCE W1750D CLI
632 Function Manual, 03/2019, C79000-G8976-C452-04
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.245 syslog-server
Description
This command configures Syslog server for an AP.
Syntax
syslog-server <IP-address>
no…
Parameter
Description
syslog-server <IP- ad-
dress>
Specifies the IP address to configure the syslog server.
no…
Removes the configuration.
Usage Guidelines
Use this command to configure syslog server for an AP.
Example
The following command configures the IP address of the syslog server for an AP.
(scalance)(config)# syslog-server 192.0.2.9
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode