Siemens SCALANCE W1750D CLI - Show L3-Mobility

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
521
Usage Guidelines
Use this command to view the static IPv6 routes configured on the AP.
Examples
The following example shows the output of the show ipv6 route command:
Kernel IPv6 routing table
Destination
-----------
2001:470:36:5c3:ffff:ffff:ffff:1001/128
Next Hop
--------
::
Flags
-----
U
Metric
------
256
2001:470:36:5c3::/64
::
UA
256
fe80::/64
::
U
256
::/0
fe80::6273:5cff:fe65:ee19
UGDA
1024
::1/128
::
U
0
2001:470:36:5c3:aea3:1eff:fecd:471a/128
::
U
0
2001:470:36:5c3:ffff:ffff:ffff:5b/128
::
U
0
2001:470:36:5c3:ffff:ffff:ffff:1001/128
::
U
0
fe80::aea3:1eff:fecd:471a/128
::
U
0
ff02::d/128
ff02::d
UC
0
ff02::1:2/128
ff02::1:2
UC
0
ff00::/8
::
U
256
Ref
Use Iface
---
---------
0
0 br0
0
0 br0
0
0 br0
0
0 br0
0
1 lo
0
1 lo
2800
1 lo
6
1 lo
6602
1 lo
12194
0 br0
2
0 br0
0
0 br0
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.151 show l3-mobility
Description
This command displays details about the Layer-3 (L3) events, mobility configuration, and
roaming status of the AP clients.