Siemens SCALANCE W1750D CLI - Airwave-Rtls

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
37
Parameter
Description
Range
disable
Disables AirGroup services for the profile.
—
disallow-role
<role>
Restricts the user roles specified for role from accessing the Air-
Group service.
Disabled
disallow-vlan
<VLAN-ID>
Restricts the AirGroup servers connected on the specified VLANs
from being discovered.
Disabled
enable
Enables the AirGroup service for the profile.
—
id <air-
groupserviceid>
Allows you to specify the AirGroup service ID corresponding to the
service that you are trying to configure.
NOTE:
The service IDs cannot be added for the pre- configured
services.
—
no…
Removes the AirGroup service configuration.
—
Usage Guidelines
Use this command to enforce AirGroup service policies and define the availability of a
services for an AirGroup profile. When configuring AirGroup service for an AirGroup profile,
you can also restrict specific user roles and VLANs from availing the AirGroup services.
Example
The following example configures AirGroup services:
(scalance)(config)# airgroupservice AirPlay
(scalance)(airgroup-service)# description AirPlay Service
(scalance)(airgroup-service)# disallow-role guest
(scalance)(airgroup-service)# disallow-vlan 200
(scalance)(airgroup-service)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode and AirGroup services configuration sub-mode.
4.1.11 airwave-rtls
Description
This command integrates AirWave RTLS settings for Scalance W and sends the RFID tag
information to an AirWave RTLS server with the RTLS feed to accurately locate the wireless
clients.