Siemens SCALANCE W1750D CLI - Usb-Port-Disable; User

CLI Commands
4.18 U
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
645
(scalance)# uplink-vlan 0
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.18.5 usb-port-disable
Description
This command disables the USB port on the AP.
Syntax
usb-port-disable
no…
Usage Guidelines
Use this command to disable the USB port. To re-enable the port. run the no usb-port-
disable command. Reboot the AP after changing the USB port status.
Example
The following example shows how to disable the USB port on the AP:
(scalance)# usb-port-disable
Remind: Command takes effect after AP reboot.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.18.6 user
Description
This command creates users for an AP.