Siemens SCALANCE W1750D CLI - Show Ap Allowed-Channels

CLI Commands
4.16 S
SCALANCE W1750D CLI
272 Function Manual, 03/2019, C79000-G8976-C452-04
airgroupservice airplay
disable
description AirPlay
airgroupservice airprint
disable
description AirPrint
per-ap-settings d8:c7:c8:c4:42:98
hostname d8:c7:c8:c4:42:98
ip-address 10.17.161.254 255.255.255.0 10.17.161.1 10.13.6.110 ""
swarm-mode cluster
wifi0-mode access
wifi1-mode access
g-channel 0 0
a-channel 0 0
uplink-vlan 0
g-external-antenna 0
a-external-antenna 0
The output of this command provides the following information:
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.18 show ap allowed-channels
Description
This command displays a list of allowed channels for an AP.
Syntax
show ap allowed-channels
Usage Guidelines
Specify the country code for your AP during the initial setup. Changing the country code
causes the valid channel lists to be reset to the defaults for that country.