Siemens SCALANCE W1750D CLI - Show Image

CLI Commands
4.16 S
SCALANCE W1750D CLI
512 Function Manual, 03/2019, C79000-G8976-C452-04
Lost carrier 0
Parameter
Description
Speed
Shows speed of the Ethernet interface.
Received packets
Shows total number of received packets.
Received bytes
Shows the total number of received bytes.
Receive dropped
Shows total number of packets dropped.
Receive errors
Shows total number of errors during packet receive.
Receive missed er-
rors
Shows total number of errors missed during packet receive.
Receive overrun
errors
Shows total number of received overrun errors.
Receive frame er-
rors
Shows total number of frame errors during packet receive.
Receive CRC errors
Shows total number of CRC errors during packet receive.
Receive length er-
rors
Shows total length of the error.
Transmitted packets
Shows total number of transmitted packets.
Transmitted bytes
Shows total number of transmitted bytes.
Transmitted dropped
Shows total number of packets dropped.
Transmission errors
Shows total number of errors during packet transmit.
Lost carrier
Shows total number of lost carriers.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.143 show image
Description
This command displays the Scalance W software version running on an AP.
Syntax
show image version
Example
The following example shows the output of show image version command:
Primary Partition 0
Primary Partition Build Time :2018-07-15 14:28:33 PDT
Primary Partition Build Version :8.4.0.0_65801 (Digitally Signed - Production Build)
Backup Partition 1