Siemens SCALANCE W1750D CLI - Show Calea Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
414 Function Manual, 03/2019, C79000-G8976-C452-04
---- -----
Master IP 127.0.0.1
Authorization Token Not Configured
Endpoint URL Not Configured
BLE Ready No
Update Intvl (in sec) 300
BLE debug log Enabled
Operational Mode 0 (APB: 0)
Uplink Status 0 (APB: 0)
APB Connection Status 0
Last BLE Device Update Attempt 00:00:00:00:00:00
Last Update Sent Time No Update Sent
Command Information
AP Platform
Command Mode
All platforms
Privileged Exec mode
4.16.100 show calea config
Description
This command displays the details configured for CALEA server integration on an AP.
Syntax
show calea config
Usage Guidelines
Use this command to CALEA configuration details.
Example
The following example shows the output of the show calea config command:
(scalance)# show calea config
calea-ip :10.0.0.5
encapsulation-type :gre
gre-type :25944