Siemens SCALANCE W1750D CLI - Show Acl

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
243
any any match dns
Action
Log
TOS
802.1P Blacklist
App Throttle (Up:Down) Mirror DisScan
ClassifyMedia
------
---
---
------ ---------
---------------------- ------ -------
----------
permit
permit
permit
permit
Vlan Id 0
ACL Captive Portal:disable
ACL ECP Profile :default CALEA :disable
Bandwidth Limit :downstream disable upstream disable Access Rule Name :NewRole18
In Use :No
The output of this command includes the following parameters:
Parameter
Description
Access Rule Name
Displays the name of the access rule.
In use
Indicates if the access rules are in use.
Access Rules
Displays the access rules parameter for each rule configured for the SSID
or Wired profile users.
VLAN Id
Indicates the VLAN ID associated with the SSID or wired profile access
rules
ACL Captive Portal
Indicates if the ACL rules are applicable to the captive portal users.
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode
4.16.6 show acl
Description
This command displays the ACL configuration details.
Syntax
show acl [domains]
Parameter
Description
domains
Displays the domains configured with an ACL.