Siemens SCALANCE W1750D CLI - Show Amp-Audit

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
267
4.16.17 show amp-audit
Description
This command displays the set of configurations on the AirWave Management Platform.
Syntax
show amp-audit
Usage Guidelines
Use this command to view the AMP related configurations.
Example
The following example shows the output of the show amp-audit command:
rule any any match any any any deny
wlan access-rule ssid1
index 3
rule any any match any any any deny
hotspot anqp-nai-realm-profile "name1"
enable
nai-realm-name ""
nai-realm-eap-method eap-ttls
nai-realm-auth-id-1 non-eap-inner-auth nai-realm-auth-
value-1 mschapv2
nai-realm-auth-id-2 credential
nai-realm-auth-value-2 uname-password nai-realm-
encoding utf8
no nai-home-realm
hotspot anqp-nai-realm-profile "nr1"
enable
nai-realm-name "name1"
nai-realm-eap-method eap-sim
nai-realm-auth-id-1 non-eap-inner-auth nai-realm-auth-
value-1 mschapv2
nai-realm-auth-id-2 credential
nai-realm-auth-value-2 uname-password nai-realm-