Siemens SCALANCE W1750D CLI - Show Dhcps Config

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
475
dhcp-option=1,255.255.254.0 dhcp-option=3,192.168.10.1 dhcp-option=6,10.1.1.50
dhcp-option=54,192.168.10.1
}
---------------------/tmp/dnsmasq.leases------------------
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.120 show dhcps config
Description
This command provides information about the DHCP scopes configured for an AP.
Syntax
show dhcps config
Usage Guidelines
Use this command to view configuration details associated with the DHCP scopes enabled
on an AP.
Example
The following example shows the output of the show dhcps config command:
Distributed DHCP Scopes
-----------------------
Name
Type
VLAN
Netmask
Default
Router
DNS Server
Domain Name
----
----
----
-------
-----------
---
----------
-----------
Instnt-DL2
Distributed,L2
100
0.0.0.0
0.0.0.0
0.0.0.0
Lease Time
IP Address Range
Client
Count
DHCP Option
Reserve
First
Reserve
Last
43200
----------------
10
-----------
0
0
Branch ID
Branch Netmask
Branch
Router
DHCP Host
DHCP DDNS
DDNS Key
---------
--------------
-----------
--
---------
---------
--------
0.0.0.0
0.0.0.0
0.0.0.0
Disabled