Siemens SCALANCE W1750D CLI - Show Log L3-Mobility

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
533
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.161 show log l3-mobility
Description
This command displays the logs for Layer-3 mobility domains configured on an AP.
Syntax
show log l3-mobility [<count>]
Parameter
Description
<count>
Filters the log output based on the number speci-
fied.
Usage Guidelines
Use this command to view the L3-mobility logs for an AP.
Example
The following output is displayed for the show log l3-mobility command:
May 9 21:23:07: Potential Foreign Client Information: mac c4:85:08:de:06:d4 rcvd from
self
vlan 0, 1 tid 255 oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
l2-timed-out,test
May 9 01:43:22: Station Offline: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 0 tid
255
oldapip 0.0.0.0 fapip 0.0.0.0 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: This Client is Normal: mac 08:ed:b9:e1:51:87 sent to self vlan 0, 1
tid 255
oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:53: Too many retries: mac 08:ed:b9:e1:51:87 rcvd from self vlan 0, 1 tid
255
oldapip 0.0.0.0 fapip 10.17.88.59 hapip 0.0.0.0 vcip 0.0.0.0 info
May 9 01:25:52: Potential Foreign Client Information: mac 08:ed:b9:e1:51:87 rcvd from
self