Siemens SCALANCE W1750D CLI - Show Ap Debug Shaping-Table

CLI Commands
4.16 S
SCALANCE W1750D CLI
362 Function Manual, 03/2019, C79000-G8976-C452-04
Disconnect Rejects 0
0
0
0
0
No Secret 0
0
0
0
0
No Session ID 0
0
0
0
0
Bad Authenticator 0
0
0
0
0
Invalid Request 0
0
0
0
0
Packets Dropped 0
0
0
0
0
Unknown service 0
0
0
0
0
CoA Requests 0
0
0
0
0
CoA Accepts 0
0
0
0
0
CoA Rejects 0
0
0
0
0
No permission 0
0
0
0
0
SEQ first/last/free
0/0/0
0/0/0
0/0/0
0/0/0
Packets received from
unknown clients
::0
Packets received with
unknown request
::0
Total RFC3576 packets
Received
::0
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.69 show ap debug shaping-table
Description
This command displays the shaping information for clients associated to an AP.
Syntax
show ap debug shaping-table
Usage Guidelines
Use this command to view the shaping information for clients connected to an AP.
Example
The following output is displayed for the show ap debug shaping-table command:
Interface :wifi1
VAP aruba102
in out drop fail q cmn[C:O:H] Numcl TotCl BWmgmt