Siemens SCALANCE W1750D CLI - Ip-Mode

CLI Commands
4.9 I
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
187
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and IP DHCP configuration
sub-mode.
4.9.12 ip-mode
Description
This command configures the IP mode to enable the processing of IPv4 packets globally.
Syntax
ip-mode {v4-only|v4-prefer}
no…
Parameter
Description
ip-mode
Configures the IP mode to process IPv6 or IPv4 packets.
v4-only
Enables global processing of IPv4 packets.
v4-prefer
TBU
no…
Removes the configuration.
Usage Guidelines
Use this command to configure IP modes to enable global processing of IPv4 packets.
Example
The following example configures the IPv4 mode:
(scalance)(config)# ip-mode v4-only
(scalance)(config)# end
(AP )# commit apply
Command Information
AP Platform
Command Mode
All platforms Privileged EXEC mode