Siemens SCALANCE W1750D CLI - Show Ap Debug Dot1 X-Statistics

CLI Commands
4.16 S
SCALANCE W1750D CLI
342 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.57 show ap debug dot1x-statistics
Description
This command displays the aggregate 802.11X debug statistics for an AP.
Syntax
show ap debug dot1x-statistics
Usage Guidelines
Use this command to view information about the 802.11x authentication.
Example
The following output is displayed for the show ap debug dot1x-statistics command:
802.1X Statistics
-----------------
Mac Name AP Auth-Succs Auth-Fails Auth-Tmout Re-Auths
---------- ------ ---- ---------- -------- --------- ------- -------
08:ed:b9:e1:51:7d d8:c7:c8:3d:42:12 0 0 0 0
Total: 0 0 0 0
Supp-Naks UKeyRot MKeyRot ---------- -------- -------- 0 0 0
0 0 0
802.1x Counters WPA2
Message-1 ................................................. 3
Message-2 ................................................. 2
Message-3 ................................................. 2
Message-4 ................................................. 2
The output of this command includes the following parameters:
Parameter
Description
Mac
Displays the MAC address of the authenticated client.
Name
Displays the name of the client device
AP
Displays the AP device details to which the client is connected.
Auth-Succs
Displays the number of times the client authenticated successfully.