Siemens SCALANCE W1750D CLI - Mgmt-Auth-Server

CLI Commands
4.11 M
SCALANCE W1750D CLI
202 Function Manual, 03/2019, C79000-G8976-C452-04
no…
Parameter
Description
mgmt-accounting com-
mand all
Configures TACACS+ servers to enable accounting for management
users.
no…
Removes the configuration.
Usage Guidelines
Use this command to record the user name of the management users and the respective IP
address sending the request to account for the usage of the authorized network services.
Example
The following example configures a TACACS+ server for management accounting
(Access Point)(config)# mgmt-accounting command all tacacs1
(Access Point)(config)# end
(Access Point)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.11.8 mgmt-auth-server
Description
This command configures authentication servers for management UI of the Virtual
Controller.
Syntax
mgmt-auth-server <server>
no…
Parameter
Description
mgmt-auth-server
<server>
Configures a server for management user authentication.
no…
Removes the configuration.