Siemens SCALANCE W1750D CLI - Hotspot Anqp-Nai-Realm-Profile

CLI Commands
4.8 H
SCALANCE W1750D CLI
126 Function Manual, 03/2019, C79000-G8976-C452-04
4.8.8 hotspot anqp-nai-realm-profile
Description
This command defines a NAI realm information that can be sent as an ANQP information
element in a GAS query response.
Syntax
hotspot anqp-nai-realm-profile <profile-name>
enable
nai-home-realm
nai-realm-auth-id-1 <auth-ID> nai-
realm-auth-id-2 <auth-ID>
nai-realm-auth-value-1 <auth-value>
nai-realm-auth-value-2 <auth-value>
nai-realm-eap-method <eap-method>
nai-realm-encoding <encoding>
nai-realm-name <name>
no…
Parameter
Description
Range
hotspot anqp-nai-
realm-profile
<profile-name>
Configures a NAI realm hotspot profile. —
enable
Enables the NAI realm profile.
—
nai-home-realm
Sets the realm in this profile as the NAI Home
Realm.
—
nai-realm-auth-id-
1 nai-realm-auth-
id-2
Configures the NAI realm authentication ID.
Use the
nai-realm-auth-id-1
command to send the
one of the following authentication methods for the
primary NAI realm ID.
Use the
nai-realm-auth-id-2
command to send the
one of the following authentication methods for the
secondary NAI realm ID.
—