Siemens SCALANCE W1750D CLI - Show Airgroupservice

CLI Commands
4.16 S
SCALANCE W1750D CLI
254 Function Manual, 03/2019, C79000-G8976-C452-04
The output of this command provides the following information:
Column
Description
MAC
Indicates the MAC address of the AirGroup clients.
IP
Indicates the IP address of the AirGroup clients.
Host Name
Indicates the hostname of the AirGroup clients.
VLAN
Displays VLAN details of the AirGroup clients.
Wired/Wireless
Displays if the AirGroup user is connected to a wired or wireless interface.
Role
Indicates the AirGroup user role.
Username
Displays the username of the AirGroup user.
AP-Mac
Displays the MAC address of the AP to which the user is connected.
Query/Resp
Displays information query and response details exchanged between the
AirGroup user and the AirGroup server.
Num Users
Indicates the number of AirGroup users.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.8 show airgroupservice
Description
This command displays the AirGroup service configuration details for an AP.
Syntax
show airgroupservice [disallow {role| vlan}]
Parameter
Description
show airgroupservice
Displays a summary of the configuration details for AirGroup services.
disallow {role |vlan}
Displays the user roles or VLANs that are restricted from accessing Air-
Group services. When the access to AirGroup services is restricted, the
clients that are assigned with a specific role or VLAN will not be able to
use the AirGroup service.
Usage Guidelines
Use the show airgroupservice command to view the AirGroup services configured on an AP.
Example
The following output is displayed for the show airgroupservice command: