Siemens SCALANCE W1750D CLI - Cellular-Uplink-Profile

CLI Commands
4.3 C
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
65
Example
The following example configures a CALEA profile:
(scalance)(config)# calea
(scalance)(calea)# ip 192.0.8.29
(scalance)(calea)# ip mtu 1500
(scalance)(calea)# encapsulation-type gre
(scalance)(calea)# gre-type 25944
(scalance)(calea)# end
(scalance)# commit apply
Command Information
AP platform
Command Mode
All platforms Configuration mode and access rule configuration
sub-mode.
4.3.2 cellular-uplink-profile
Description
This command provisions the cellular (3G or 4G) uplink profiles on an AP.
Syntax
cellular-uplink-profile <profile> 4g-
usb-type <4G-usb-type>
modem-country <modem-country>
modem-isp <modem_isp>
usb-auth-type <usb_authentication_type>
usb-dev <usb-dev>
usb-dial <usb-dial>
usb-init <usb-init>
usb-modeswitch <usb-modeswitch>
usb-passwd <usb-passwd>
usb-tty <usb-tty>
usb-type <usb-type>
usb-user <usb-user>