Siemens SCALANCE W1750D CLI - Aaa Radius Modifier

CLI Commands
4.1 A
SCALANCE W1750D CLI
30 Function Manual, 03/2019, C79000-G8976-C452-04
4.1.4 aaa radius modifier
Description
This command configures the RADIUS modifier profile to customize the attributes that are
included, excluded and modified in the RADIUS request before it is sent to the authentication
server.
Syntax
aaa radius-attributes modifier <profile_name>
Parameter
Description
<profile_name>
The specified RADIUS modifier profile name
clone
Copy data from another Radius Modifier Profile.
exclude
Attribute to be excluded in RADIUS request.
include
Authentication protocol type. Use PAP as the authentication typeAttrib-
ute/Value to be included in RADIUS request.
no
Delete Command
Usage Guidelines
Use the show aaa radius modifier command to display a list of RADIUS modifier profiles. To
create a RADIUS modifier profile with customized attributes, use the
aaa radius-attributes
command.
Example
Example for Included attribute
(scalance) [md](config) #aaa radius-attributes add BW-Area-Code 18 integer vendor
Boingo 22472
(scalance) [md](Radius Modifier Profile "radmodifier1") # include BW-Area-Code static
"212"
(scalance) [md](Radius Modifier Profile "radmodifier1") # no include BW-Area-Code
Example for excluded attribute
(scalance) (config) #aaa radius-attributes add BW-Area-Code 18 integer vendor Boingo
22472
(scalance) (Radius Modifier Profile "radmodifier1") # exclude BW-Area-Code
(scalance) (Radius Modifier Profile "radmodifier1") # no exclude BW-Area-Code
Example for modified attribute
Default attributes to carry to radius server can be modified with include option.
(scalance) Radius Modifier Profile "radmodifier1") # include "Siemens -location-id"
static "Shim- office"