Siemens SCALANCE W1750D CLI - Show Election

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
495
Parameter
Description
Upgrade in process
Shows whether the DRT upgrade of the Scalance W cluster is in pro-
gress.
Upgrade status
Shows the status of DRT upgrade.
DRT sync in process
Shows if there is a slave AP synchronizing the DRT file from the master
AP.
Reset in process
Shows if the new DRT file is being reset to the default DRT of the image
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.129 show election
Description
This command shows master AP election statistics.
Syntax
show election {statistics}
Parameter
Description
statistics
Shows master election statistics.
Usage Guidelines
Use this command to view the statistics of the AP selected as Virtual Controller.
Example
The following example shows the output of show election statistics command:
State : Master
master_beacon : sent=8162 rcvd=0
hierarchy_beacon: sent=7685 rcvd=0
hierarchy_ack : sent=0 rcvd=0
beacon_req : sent=0 rcvd=0
Slave->Pot-Master : 0
time Pot-master->Master: 0 time
Pot-master->Slave : 0