Siemens SCALANCE W1750D CLI - Syslocation

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
631
Usage Guidelines
Use this command to configure syslog facility levels and to generate logs based on various
user and AP parameters.
Example
The following example configures syslog facility levels for ap-debug and user-debug:
(scalance)(config)# syslog-level error ap-debug
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.16.244 syslocation
Description
This command allows you to define the physical location for the AP.
Syntax
syslocation <syslocation>
no…
Command/Parameter
Description
<syslocation>
Allows you to specify a physical location.
no
Removes the configuration.
Usage Guidelines
Use this command to define the physical location of the AP.
Example
The following example sets the physical location of the AP to Sunnyvale:
(scalance)(config) # syslocation <Sunnyvale>