Siemens SCALANCE W1750D CLI - Configure Terminal; Console

CLI Commands
4.3 C
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
79
The following command reverts the already committed changes:
(scalance) # commit revert
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode.
4.3.14 configure terminal
Description
This command allows you to enter configuration commands.
Syntax
configure terminal
No parameters.
Usage Guidelines
Upon entering this command, the enable mode prompt changes to:
(scalance)(config)#
To return to EXEC mode, enter Ctrl-Z, end or exit.
Example
The following command allows you to enter configuration commands:
(scalance) # configure terminal
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode.
4.3.15 console
Description
This command enables console access to an AP through the serial port