Siemens SCALANCE W1750D CLI - Show Radius-Servers Support

CLI Commands
4.16 S
SCALANCE W1750D CLI
564 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.194 show radius-servers support
Description
This command displays the RADIUS server configuration details for an AP.
Syntax
show radius-servers support
Usage Guidelines
Use this command to view the RADIUS server information for an AP.
Example
The following example shows the output of show radius-servers support command:
RADIUS Servers
--------------
Name
IP Address
Port
Acctport
Key
----
InternalServer
----------
127.0.0.1
----
1616
--------
1813
---
596ff8d50a0662b542e96567bb87db331
208cc412bfb4aade8033ca9b46e5f09f933f89bb374bdd80b9acadcc981fdf5ea5ea13e33e43378f
56913cd3e76dc7a
test
test@abc.com 1812
1813
testServer
test@test.com 1812
1813
Timeout
Retry Count
NAS IP Address
NAS Identifier
In Use
RFC3576
-------
-----------
--------------
--------------
------
-------
5
3
Yes
5 3 No
Airgroup RFC3576-ONLY Airgroup RFC3576 port Deadtime DRP IP DRP IP Mask
------ ------------- ---------------------- ------- ------ ------------
Y 5999 5
5
DRP VLAN DRP Gateway Radsec Radsec port
--------- ----------- -------- -----------
Disabled Disabled
Enabled 2083