Siemens SCALANCE W1750D CLI - Arm

CLI Commands
4.1 A
SCALANCE W1750D CLI
50 Function Manual, 03/2019, C79000-G8976-C452-04
Parameter
Description
debug-command
Applies the configuration settings from the debug command.
delta-config
Applies the configuration settings from the
delta-config
command.
Usage Guidelines
Use this command to apply the current configuration settings on the AP.
Example
The following example installs the captive portal logo on an AP.
(scalance)(config)# apply cplogo-inistall http://cp.logo.com
The following example uninstalls the captive portal logo on an AP.
(scalance)(config)# apply cplogo-inistall http://cp.logo.com
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode.
4.1.27 arm
Description
This command assigns an ARM profile for an AP and configures ARM features such as band
steering, spectrum load balancing, airtime fairness mode, and access control features.
Syntax
arm
80mhz-support
a-channels <channel>
air-time-fairness-mode {<default-access>| <fair-access>| <preferred-access>}
backoff-time <secs>
band-steering-mode {balance-bands|prefer-5ghz| force-5ghz| disable}
channel-quality-aware-arm-disable
channel-quality-threshold
channel-quality-wait-time
client-aware